RB 1000
Timesavers 42 RB 1000

42 RB 1000 series

The Timesavers 42 Rotary Brush (42 RB) 1000 series, winner of the Red Dot design award 2016, is Timesavers most popular solution for customers who require a fully deburred part of high quality and beautiful finish. The 42 RB 1000 is the compact version of the 42 RB 1350.

The Timesavers compact 42 RB series
This is accomplished using a multi-directional brush machine, with two heads, that uniformly deburrs and finishes the edges of laser-cut, punched, and machined parts in one pass. Providing even, controllable edge radiusing in all directions on flat, shaped,  plasma cut, punched, machined parts or 3D parts. The Rotary Brush will deburr edges of small and large parts without harming surface coatings such as cladding, zinc, or laser film.

Number of heads: 1-3
Head types: rotary brush, drum
Machine widths: 1000 mm
Abrasive brush size: 350 mm
Number of brushes: 2
Quick change brush mounting
0-100 mm bed opening
0,6-8 m/min  feed speed, 1,3 KW
Up to 11 KW main drive motor
180 mm diameter adjustable contact drum
Vacuum conveyor bed is standard

Contact Timesavers for machine options and dust collection
Uses: metal finishing, deburring and edge rounding

 Standard Execution:
– Centralized control panel with simple set-up
– Rotary brush head carrousel with 1 clockwise and 1 counterwise rotating brushes
– Extremely long lifetime of brush tooling upto 3000 hours (low tooling cost)
– One or two abrasive belt contact roller heads available
– Vacuum table with access for internal cleaning
– Motorized table opening for work pieces 0 – 100 mm
– Frequency controlled conveyor speed 0.5 – 8 m/min
– CE
– Window doors and illuminated machine interior to observe and control

– Removing burrs from laser, plasma, flame, waterjet cut parts, punched, machined
and routed parts
– Stainless steel, mild steel, aluminum, copper, etc.
– Deburr zintec (standard and AF), galvanized, plated, aluzinc, light alloy, plastic
and film coated, without coating damage, including ink marked parts
– Even, controllable edge radiussing for e.g. aerospace, catering, medical industries
– Flat, shaped and 3-D parts with pockets/protrusions
– Pre-grinding of heavy burrs and surface finishing in one pass
– Processing of mixed materials with suitable wet dust collector
– Processing of small parts 50 x 50 mm possible with standard vacuumtable

469 Picture 041 316

Photo Gallery



Download M-42-RB-1000-EN.pdf


Compatible aggregates

41/42 RB Contactroller

Wide abrasive belt for pre grinding heavy burrs from laser, punched and water jet cut parts. Also suitable for surface finishing of stainless steel, mild steel, copper, aluminum etc.…


42 RB Rotating brush

Rotating carousel with 8 abrasive flap brushes; 4 rotating clockwise and 4 rotating counter-clockwise for uniformly deburring and rounding edges of laser plasma cut, punched and machined parts in…


41/42 RB Brush

Brush head for deburring, punched parts , removing the secondary burr after pre-grinding with a coated abrasive belt on laser , plasma, flame or water yet cut parts. Also…